E.R. HVAC · ERAIRDUCT.COM
hose on the large supply · filter bagged

Step 1 of 4 · Hook up, bag the filterWe connect a negative air pressure machine to your largest ceiling supply. The filter at the bottom of your air handler goes in a plastic bag, so no dust is pulled through the coil and blower.

Step 2 of 4 · Brush each supply runA soft-bristle rotary brush on a 30 ft cable scrubs each supply duct from the register toward the air handler, farthest run first. The machine's suction pulls the loosened dust through the main supply and down the hose.

Step 3 of 4 · Move to the returnThe bag comes off and the hose moves to your hallway return. We brush the return duct toward the air handler while the suction pulls the dust the other way, back out through the grille and into the machine.

Step 4 of 4 · Final camera inspectionWe clean the blower, coil, drain pan and plenum, take the registers down and wipe them clean, then finish with a final camera inspection of your ducts to catch anything we missed.

Brush and bagged filterCamera check, clean systemDust on its way to the machine© E.R. HVAC · erairduct.com · Illustration; your ducts will differ